Aim of this work is to compare two different total knee prostheses that differ mainly in the shape of the polyethylene (PE) component inserted between the femoral and tibial plates. The best solution between them has been originally reshaped in order to reduce stress peaks. The study procedure has been divided into the following steps. First step is the digitalisation of the shape of the prostheses by means of a 3D laser scanner. The morphology of two prototypes of the prostheses has been acquired by elaborating multiple Moirè fringe patterns projected on their surfaces. Second step consisted on the manipulation of these data in a CAD module, that is the interpolation of raw data into NURBS surfaces, reducing singularities due to the typical scattering of the acquiring system. Third step has been the setting up of FEM simulations to evaluate the prostheses behaviour under benchmark loading conditions given in literature. The CAD model of the prostheses has been meshed into solid finite elements. Different flexion angles configurations have been analysed, the load being applied along the femoral axis. FEM analyses have returned stress fields in the PE insert and, in particular, in the stabilizing cam which function is to avoid dislocation. Last step has been the integrated use of CAD and FEM to modify the shape of the stabilizing cam of the best prosthesis, in order to reduce the stress peaks in the original prosthesis without affecting kinematics of the joint. Good results have been obtained both in terms of stress and contact pressure peaks reduction. © 2012 Springer-Verlag.

Finite element analysis of two total knee joint prostheses

TUMINO, DAVIDE;
2013-01-01

Abstract

Aim of this work is to compare two different total knee prostheses that differ mainly in the shape of the polyethylene (PE) component inserted between the femoral and tibial plates. The best solution between them has been originally reshaped in order to reduce stress peaks. The study procedure has been divided into the following steps. First step is the digitalisation of the shape of the prostheses by means of a 3D laser scanner. The morphology of two prototypes of the prostheses has been acquired by elaborating multiple Moirè fringe patterns projected on their surfaces. Second step consisted on the manipulation of these data in a CAD module, that is the interpolation of raw data into NURBS surfaces, reducing singularities due to the typical scattering of the acquiring system. Third step has been the setting up of FEM simulations to evaluate the prostheses behaviour under benchmark loading conditions given in literature. The CAD model of the prostheses has been meshed into solid finite elements. Different flexion angles configurations have been analysed, the load being applied along the femoral axis. FEM analyses have returned stress fields in the PE insert and, in particular, in the stabilizing cam which function is to avoid dislocation. Last step has been the integrated use of CAD and FEM to modify the shape of the stabilizing cam of the best prosthesis, in order to reduce the stress peaks in the original prosthesis without affecting kinematics of the joint. Good results have been obtained both in terms of stress and contact pressure peaks reduction. © 2012 Springer-Verlag.
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11387/13727
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 32
  • ???jsp.display-item.citation.isi??? ND
social impact