The behaviour of thin composite laminates (unidirectional, cross-ply and angle-ply) under compressive loads has been examined in cases where multiple delaminations are present. The problem is solved using the Finite Element Method (FEM) both with linear analyses, based on the eigenvalues research problem, and with nonlinear analyses, based on incremental-iterative procedures. In particular, the role of the delamination length, of the angle of the plies and of the stacking sequence on the critical load is investigated. Results are compared with those found in literature derived from experimental or numerical 2D analyses. © Freund Publishing House Ltd.
3D buckling analysis of multidelaminated composite specimens
TUMINO, DAVIDE;
2007-01-01
Abstract
The behaviour of thin composite laminates (unidirectional, cross-ply and angle-ply) under compressive loads has been examined in cases where multiple delaminations are present. The problem is solved using the Finite Element Method (FEM) both with linear analyses, based on the eigenvalues research problem, and with nonlinear analyses, based on incremental-iterative procedures. In particular, the role of the delamination length, of the angle of the plies and of the stacking sequence on the critical load is investigated. Results are compared with those found in literature derived from experimental or numerical 2D analyses. © Freund Publishing House Ltd.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
